Roof ladder

Low weight ladder with good stability. The stringers are manufactured from roller formed U-sections. The rungs are profiled to reduce the risk of slipping and have upset ends both on the inside and the outside for double safety. Design according to SS-EN 12 951. Approved for anchoring lifeline.Fixing every 5 m, but minimum 2 holders per ladder, supports every 2.0 m.

Roof Covering - Seamed Sheet
Fixing - Seam holder

Weland standing seam holder for seamed roofing sheet. Fixing is carried out by squeezing the holder onto the standing seam, no holing required. The holder fits all Weland product groups. The seam must be double-seamed.

Stairtreads - No

Loose stairtreads made of anti-slip profile metal. The stairtread is hooked around the roof ladder's rungs and locked with bolted joints. The stairtread has an angled tread surface which means that it can be used for roof ladders with a gradient of 8° to 35°.

Wire system: Without Weline

Our own wire system for fall protection that meets the rules regarding fall protection when moving on the roof.

With a wire that is installed along the roof gangways, roof ladders, ridge rail or directly on the roof, you obtain a very flexible safety solution in connection with building and construction work as well as clearing snow. The users anchor their safety lines to the wire and they can then move freely across the entire roof area without having to reconnect.

NOTE! Weline systems may only be installed together with Weland roof safety system and this calculation is for straight montage where we can deliver a finished length of the wire. For systems with continuous wire in different directions, eg between walkway and roof ladder special skills are required.

Anti-slip guard - Without Anti-slip guard

Anti-slip guard with double hook can be installed directly on roof ladders or roof gangways using angle brackets.

Properties

m
items
%

Check the items you not want to include in your configuration. (Leave all unchecked by default)