Wire system

Our own wire system for fall protection that meets the rules regarding fall protection when moving on the roof.

With a wire that is installed along the roof gangways, roof ladders, ridge rail or directly on the roof, you obtain a very flexible safety solution in connection with building and construction work as well as clearing snow. The users anchor their safety lines to the wire and they can then move freely across the entire roof area without having to reconnect.

NOTE! Weline systems may only be installed together with Weland roof safety system and this calculation is for straight montage where we can deliver a finished length of the wire. For systems with continuous wire in different directions, eg between walkway and roof ladder special skills are required.

Track The users anchor their safety line in the runner on the wire and they can then move freely across the entire roof area without having to reconnect. Best used on straight stretches on horizontal or flat sections (maximum 15 degrees).

Claw Users clip their own carabiner around the wire and they can then pass the support points with a single manoeuvre, without needing to reconnect. A suitable solution if there are several ascent points along the same wire. Can also be used along gangways and ladders in the direction of the roof fall, up to 50 degrees.

Tube Used when there is a need to draw the wire along differences in heights or curves. Users connect to an open runner and can then move freely along the wire or roof area. Can also be installed along cat ladders and steep gradients with the fall stop's fitted support points.